FITTINGS
Geolast® (TPE) - FittingsAdvantages: For applications requiring enhanced oil resistance that meets or exceeds that of nitrile rubber and epichlorohydrin. Geolast® is an oil-resistant thermoplastic elastomer that performs with the versatility of rubber with a cost closer to that of thermoplastic. Benefit through a cost savings and comparable performance to thermoset rubbers such as NBR, polychloroprene, ECO and even some urethanes. Geolast® features good retention of properties in hot air and hot oil aging, and provides a good combination of the low-temperature (-40°F) performance and the degree of oil resistance commonly associated with NBR and ECO rubber compounds. Connectors and fittings made of Geolast® exhibit low oil swell and the low compression set making it suitable for use in automotive and industrial areas. The specific gravity of Geolast® is 15% to 45% lower than NBR or ECO, permitting you to produce light-weight assemblies.
|
|
Note: Minimum order is
4000 pieces MPC is a full service supplier of functional thermoplastic injection, extrusion, and suction blow molded assemblies & subassemblies. MPC offers innovative solutions to your product design and manufacturing challenges. Through engineering, design, and prototype support, your company's programs are delivered on time, at the lowest possible cost. |
||||
 TS 16949ISO 9001ISO 14001
|
 |
 |
 Miniature Precision Components, Inc. Walworth, WI 53184 Email: Phone: 262 275 5791 ext. 2800 Fax: 262 275 6346 |
 |
| © Copyright 2002-2004 MPC Inc. All rights reserved. |